|
|
 |
Products |
 |
|
Construction
& Restoration Line
Alkyd Top Coat for interior and external application. Best suited for metal and wood structures. Standard Colours: (01) Red, (02) Grey, (04) White, (05) Brown, (06) Green, (07) Black, (08) Aluminum, (09) Asphalt Aluminum. USES For industrial and farm buildings and structural steel, equipment and tanks. Interior and exterior use. PHYSICAL PROPERTIES VISCOSITY: 68-74 KU DENSITY: 1.15 KG/L (+/-0.1) GLOSS: Semi-gloss VOLUME SOLIDS (+/- 3%): 43% SOLIDS BY WEIGHT (+/- 3%): 59% MATERIALS VOC G/L: 375 FLASH POINT: 42 degrees C THEORETICAL COVERAGE: 830 Sq. Ft/Gal per 1 mil dry film FILM THICKNESS: WET - 3.5 mils DRY - 1-1.5 mils per coat DRYING TIME: To touch: 2 hours, Tack Free: 4 hours, Hard: 16+ hours LIMITATIONS Not for immersion services, galvanized metal without proper preparation. Apply above due point. PREPARATION Surface must be clean and dry. Free from oil, grease, wax, dirt and residue from alkaline or acidic cleaners. Removal of loose rust, loose millscale, and loose paint by hand tool cleaning, power tool or commercial blast cleaning. APPLICATION Conventional or Airless Spray system or dip. CLEAN-UP Use P.B.I. Mineral Spirits. SHELF LIFE Up to 18 months in sealed container. AVAILABILITY 18.9 LTR CAUTION See MSDS and product label. |
 |
Products |
|
All statements, technical information and recommendations for the use of this product are based on tests we believe to be reliable, but the accuracy or completeness is not guaranteed. In addition, design of application and conditions during and of installations are beyond the manufacturer's control. Before using, the user shall determine the suitability of the product for his intended use. The following is made in lieu of warranties expressed or implied: manufacturer's only obligation shall be to replace such quantity of the product that has proved to be defective. 11/99
© 2000 Protective Barriers Inc. All rights reserved
